Menu 2 - HOT WATER
Overview
2.1 - temporary lux2 - HOT WATER
2.2 - comfort mode
2.3 - scheduling
2.9.1 - periodic increases2.9 - advanced
2.9.2 - hot water recirc.
* Accessory needed.
Sub-menus
For the menu HOT WATER there are several sub-menus.
Status information for the relevant menu can be found
on the display to the right of the menus.
temporary lux Activation of temporary increase in the
hot water temperature. Status information displays “off"
or what length of time of the temporary temperature in-
crease remains.
comfort mode Setting hot water comfort. The status
information displays what mode is selected, "economy",
"normal" or "luxury".
scheduling Scheduling hot water comfort. Status inform-
ation "set" displays if any part of the schedule is active
at present, "holiday setting" displays if vacation setting
is in progress (menu 4.7), otherwise it displays "off".
advanced Setting periodic increase in the hot water
temperature.
Menu 2.1 - temporary lux
Setting range: 3, 6 and 12 hours and mode "off"
Default value: "off"
When hot water requirement has temporarily increased
this menu can be used to select an increase in the hot
water temperature to lux mode for a selectable time.
Caution
If comfort mode "luxury" is selected in menu
2.2 no further increase can be carried out.
The function is activated immediately when a time period
is selected and confirmed using the OK button. The time
to the right displays the remaining time at the selected
setting.
When the time has run out F1245 returns to the mode
set in menu 2.2.
Select “off" to switch off temporary lux .
Menu 2.2 - comfort mode
Setting range: economy, normal, luxury
Default value: normal
The difference between the selectable modes is the
temperature of the hot tap water. Higher temperature
means that the hot water lasts longer.
economy: This mode gives less hot water than the other,
but is more economical. This mode can be used in smaller
households with a small hot water requirement.
normal: Normal mode gives a larger amount of hot water
and is suitable for most households.
luxury: Lux mode gives the greatest possible amount of
hot water. In this mode the immersion heater may be
partially used to heat hot water, which may increase op-
erating costs.
53Chapter 8 | Control - MenusNIBE™ F1245
To Next Page
Loading...
