Document information
This technical manual is a complement to the Installer
handbook for F2040, containing:
■
Description of functions and component description.
■
Information to facilitate fault-tracing.
■
Instructions for replacing components.
■
Wiring diagram
■
Supplementary technical information.
Safety information
This manual describes installation and service proced-
ures for implementation by specialists.
This appliance is designed for use in a
home environment and not intended
to be used by persons (including chil-
dren) with reduced physical, sensory or
mental capabilities, or lack of experi-
ence and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety. This
in accordance to applicable parts of the
low-voltage directive 2006/95/EC, LVD.
The appliance is also intended for use
by experts or trained users in shops,
hotels, light industry, on farms and in
similar environments. This in accordance
to applicable parts of the machinery
directive 2006/42/EC.
Children should be supervised to ensure
that they do not play with the appli-
ance.
This is an original instruction manual.
Translation is not allowed without ap-
proval from NIBE.
Rights to make any design or technical
modifications are reserved.
©NIBE 2015.
Symbols
NOTE
This symbol indicates danger to machine or
person.
Caution
This symbol indicates important information
about what you should observe when main-
taining your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
Marking
The CE marking means that NIBE ensures that the
product meets all regulations that are placed on it
based on relevant EU directives. The CE mark is obligat-
ory for most products sold in the EU, regardless where
they are made.
3Chapter 1 | Important informationNIBE™ F2040
1 Important information
To Next Page
Loading...
Need help?
General
