Nibe FIGHTER 1220 - Page 35

Control
33
For the Installer
FIGHTER 1220
Menu 7.3.10 Return
Pressing the enter button returns you to menu 7.3.0
Return
7.3.10
Clock
Menu 7.4.0 Temp set back time 2
Settings, e.g. for night reduction can be selected in the
submenus to this menu.
Temp set back time 2
7.4.0
Menu 7.4.1 Heating sys per. 2
The shunt system to be affected by day change period
2 is selected here. When shunt group 2 is installed
both Shunt 1 and 2 can be selected.
Heating sys per. 2
7.4.1
Menu 7.4.2 Set back temp. +/-
Changes to the flow temperature with a day change,
e.g. night reduction are set here. The value is
adjustable between -10 and 10.
0
Set back temp. +/-
7.4.2
Menu 7.4.10 Return
Pressing the enter button returns you to menu 7.4.0
Return
7.4.10
U
U
Menu 7.4.3 — 7.4.9 Set Time Monday — Sunday
The time for the day change, e.g. night reduction, is
chosen here.
Set Time Monday
7.4.3
U
U
Menu 7.5.0 Timer XHW
Settings are made in the submenus of this menu when
extra hot water is required on a specific day.
Timer XHW
7.5.0
Menu 7.5.2 — 7.5.8 Extra HW Monday — Sunday
Here you select the period for respective days when
extra hot water should be activated. Hours and min-
utes for both start and stop are shown Equal values or
the stop time before the start time means that extra
hot water is not activated.
03:30–06:15
Extra HW Monday
7.5.2
Menu 7.5.9 Return
Pressing the enter button returns you to menu 7.4.0
Return
7.5.9
Menu 7.8 Return
Pressing the Enter button returns you to menu 7.0.
Return
7.8
U
U
Menu 7.5.1 Timer Extra HW
You choose here whether the time setting should be
On or Off.
Off
Timer Extra HW
7.5.1
U
Menu 7.7 Reset timers
You can chose here to reset the time settings. Auto-
matic return to Off after one minute.
Off
Reset timers
7.7
U