Digitax SF Instruction Manual
1. Before Use
1. Important Safety Instructions
Adjusting parameters
Some parameters have a profound effect on the operation of the drive. They must not be
altered without careful consideration of the impact on the controlled system. Measures must
be taken to prevent unwanted changes due to error or tampering.
Electromagnetic compatibility (EMC)
Installation instructions for a range of EMC environments are provided in an EMC
datasheet. If the installation is poorly designed or other equipment does not comply with
suitable standards for EMC, the product might cause or suffer from disturbance due to
electromagnetic interaction with other equipment. It is the responsibility of the installer to
ensure that the equipment or system into which the product is incorporated complies with
the relevant EMC legislation in the place of use.
5
To Next Page
Loading...
