Safety information Introduction Product information System configuration
Mechanical
Installation
Electrical Installation
Unidrive M Modular Installation Guide 31
Issue Number: 2
Figure 5-10 Parallel control connections
*Only supplied with follower drive.
N
The parallel cable should be routed according to the rules shown in Figure 6-19 Sensitive signal circuit clearance on page 72 for the control cable.
N
The screw locks on the parallel cable must be fully tightened.
Input from
master
to follower
Output to
next
follower
Output from
master to
follower
To Next Page
Loading...
Need help?
General