Nidec Control Techniques M701 User Manual

Safety information Introduction Product information System configuration
Mechanical
Installation
Electrical Installation
16 Unidrive M Modular Installation Guide
Issue Number: 2
3.3 Nameplate description
Figure 3-2 illustrates typical nameplate and rating labels.
Figure 3-2 Typical drive rating labels
* This label is only applicable to Size 7 and above.
Refer to Figure 2-9 Drives model number on page 11 for further information relating to the labels.
Date code format
The date code is split into two sections: a letter followed by a number. The letter indicates the year, and the number indicates the week number (within
the year) in which the Solutions Module was built. The letters go in alphabetical order, starting with A in 1990 (B in 1991, C in 1992 etc).
Example:
A date code of W28 would correspond to week 28 of year 2013.
Model
Approvals
Input phases & input current
Output phases & Heavy
Duty/Normal Duty rating
Serial number
Input voltage
Output voltage
Customer and date code
M000-094 02240 EUO
110/132kW STDN39
Input frequencyInput frequency
M000-094 02240 EU0
Model
Frame
Voltage
Heavy Duty
current rating
Power
format
Control
Fan power
supply
Refer to
User Guide
Normal/Heavy
Duty power rating
Approvals
Input phases & input current
Output phases & Heavy
Duty/Normal Duty rating
Serial number
Input voltage
Output voltage
Customer and date code
110/132kW STDN39
Large Label*
CE approval Europe
C Tick approval Australia
UL / cUL approval
USA &
Canada
RoHS compliant Europe
R
Key to approvals
NOTE

Nidec Control Techniques M701 Specifications

General

Brand	Nidec
Model	Control Techniques M701
Category	DC Drives
Language	English