Safety information Product information Mechanical installation Electrical installation Multi axis system design Technical data
8 Digitax HD M75X Series Installation and Technical Guide
Issue Number: 5
2 Product information
The Digitax HD M75X series is a range of high performance servo drives used as a standalone single axis or easily configured for multi-axis systems.
Functionality also allows for this range of drives to be reconfigured for high performance universal AC motor control.
2.1 Introduction
Servo and Universal AC drive
This product family consists of the following variants:
• Digitax HD M750 Ethernet
• Digitax HD M751 Base
• Digitax HD M753 EtherCAT
Common features (Digitax HD M750, M751 and M753)
• Universal high performance open and closed loop control for induction, servo, permanent magnet and linear motors using Unidrive M motor
control algorithms.
• Onboard IEC 61131-3 programmable automation and motion control
• Flexibility with speed and position measurement, supporting multiple devices and all common interfaces
• SD Media Card slot for parameter copying and data storage.
• Dual channel Safe Torque Off (STO) input.
• Simplified wiring and networking for multi-axis arrangements.
• Connect support for quick start commissioning/start up (downloadable from controltechniques.com).
• Option module connectable.
Variant description summary (Digitax HD M750, M751 and M753)
Digitax HD M750 Ethernet
• Ethernet fieldbus communications.
• Integrated 2 port Ethernet switch
Digitax HD M751 Base
• EIA 485 serial communications interface
• Option module support as standard for configuration and flexibility
Digitax HD M753 EtherCAT
• Onboard EtherCAT slave for centralized motion control and accurate synchronization applications.
• 2 integrated EtherCAT ports.
2.2 Model number
The way in which the model numbers for the Digitax HD M75X series product range are formed is illustrated below:
Figure 2-1 Model number
Identification Label
Electrical Specifications
Derivative
Frame Size:
Voltage Rating:
Current Rating:
Nominal current rating x 10
Power Format:
0
Optional Build
Customer Code
00
A B 1 01
Customer Code :
00 = 50 Hz
Documentation
1
Documentation:
2 - 200 V (200 - 240 ±10 %)
4 - 400 V (380 - 480 ±10 %)
M753 -
01
2
00022
A
Configuration
1
Safety:
1 - Standard
Encode r Interface:
0 - Standard
01 = 60 Hz
Power
Format
Encoder
Interface
Mounting kit and display options:
AB101 - Mounting kit not fitted/
Compact display fitted
(M750, M753)
AB110 - Mounting kit fitted/
Compact display not fitted (M751)
Digitax HD range
Product Line
M751 - Base
M753 - EtherCAT
M750 - Ethernet
01
02
03
To Next Page
Loading...
