Safety information Product information Mechanical installation Electrical installation Multi axis system design Technical data
Digitax HD M75X Series Installation and Technical Guide 21
Issue Number: 5
3.4.1 Drive state representation
Figure 3-6 KI-Compact display
Refer to the relevant Digitax HD M75X Control User Guide for more information.
3.5 KI-Remote Keypad Adaptor installation
The Digitax HD M75X Remote Keypad Adaptor provides an EIA-485 port for permanent connection to a KI-Remote Keypad or the temporary
attachment for PC tool connection. The KI-Remote Keypad Adaptor is available from the supplier of the drive. Refer to section 2.8 Installation and
system accessories on page 14.
Figure 3-7 Installing the KI-Remote Keypad Adaptor without display fitted
1. Align the KI-Remote Keypad Adaptor to the display housing and push on until it clicks into place.
1. Single Character display.
2. Reset switch.
3. Rotary dial for node address setting (least significant).
4. Rotary dial for node address setting (Most significant).
To Next Page
Loading...
