EasyManua.ls Logo

Nidec DUB Series - Page 6

Nidec DUB Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Warning
Do not set in a location which is
susceptible to rain and water or an
area of high moisture.
Do not set under the re-alarm
box or sprinkler.
Keep su󰀩cient space between the
kiln and nearby walls.
Be careful of strength of the oor
in set-up location.
Cautions
Do not use in a place which is
susceptible to direct sunlight.
Danger
Set up in a location which has
enough space.
Do not put ammable materials
near the kiln.
Set up in a location that is out of
reach of children and people outside
Please be sure to ask the electric
engineering company who supplies
the professional electrical works.
Set up in a location that is out of
reach of children.
Set up in a location that is properly
vented.
×
Installation
These are safety precautions regarding the installation of the kiln.
It may cause a re or other accidents if an object
is in touch with the top or side of the kiln.
Gas burner may fall down and cause accident.
Please pay attention to this product strictly since
it may cause re, burn or serious accident if you
operate incorrectly.
Please do not put ammable materials such as
curtains, paint, etc. within 1 meter of the kiln. It
may cause a re.
All electrical engineering works including the
power supply installation have to be conducted
by a qualied electrician.
It may cause a re. Please open
a window a few centimeters for to
allow fresh air into the room and
use a portable fan for additional air
circulation if required.
This may cause a re or failure from electrical
shock or electrical leakage.
Please set in a location which is dry and not
susceptible to rain to prevent electrical shorts.
Be sure to place the kiln on a nonammable oor
surface. Do not set up on ammable material
such as carpet. It may cause a re due to heat
unless you keep at least 15cm or more from
wall. Please use nonammable material for oor
or protect with heat insulating board or slate.
It may cause improper operation due to the heat
from kiln.
Since this product is heavy, oor material may
be damaged or kiln may fall.
It may cause trouble due to the overheating.

Related product manuals