Nidec Kato Engineering KRM2000 - Monitoring Features; Data Points Overview

32 | Kato Engineering, Inc.
5.5 Monitoring Features
This section describes all of the monitoring features provided in the KRM2000
TM
.
5.5.1 Data Points
The KRM2000
TM
Receiver provides monitoring of the following data points:
• Loop Voltage (V)
• Loop Current (I)
• Loop Frequency (kHz)
• RSSI Level
• Board Temperature (°C)
• PWM Duty Cycle
• Transmitter TX Count
• Ground Fault Resistance (Ohms)
• Generator Field Voltage (V)
• Diode Fault Detector Count
• Low Square Wave Voltage (V)
• High Square Wave Voltage (V)