Nidec NE200 - Page 12

NE200/300 Series Drive User Manual
Chapter 1 Introduction to NE200/300 Series Drive 3
 NE200−2S□□□□GB Single-phase 220V constant torque/heavy duty
application
Power（kW）
0.4
0.75
1.5
2.2
Adapted motor (kW)
0.4
0.75
1.5
2.2
Output
Voltage (V) Single phase 0~rated input voltage
Rated current(A) 2.5 4.5 7.0 10
Overload 150% 1min; 180% 20sec.
Input
Rated Volt/Freq 1phase 200V/240V; 50Hz/60Hz
Voltage range
176V~264V; voltage imbalance ≤3%; Allowable
frequency fluctuation ±5%
Rated current (A) 5.3 8.3 14 23
Braking unit Standard (Built-in)
IP rating IP20
Cooling Forced air cooling