NE200/300 Series Drive User Manual
Chapter 3 Wiring of Drive 45
Type
Termina
Terminal function Technical specification
485- 485 differential negative
1200/2400/4800/9600/19200/384
00bps;
Max. parallel 127 No.s; SW3
select adapted resistor; Max.
Length 500m. (twisted shielding
cable)
GND 486 shielding grounding
Internal isolated with COM
Fig.3-19 Arrangement of Control Circuit Terminals
3.7.2.1 NE300 Control Circuit Connection
External controller Dry contacts wiring mode is as below. (for X1-X5
multifunction input)
Fig.3-20 Control circuit wiring instruction
To Next Page
Loading...
