NE200/300 Series Drive User Manual
46 Chapter 3 Wiring of Drive
External controller PNP/NPN with common emitter wiring mode is as
below. (for X1-X5 multifunction input)
Fig.3-21 PNP/NPN common emitter wiring mode
Y1/Y2, DO: The multi-functional output terminals adopt drive internal
+24V power supply wiring mode.
Fig.3-22 wiring mode of internal +24V power supply
Y1/Y2, DO: The multi-functional output terminals adopts external
power supply wiring mode
User Controller
Inside of Drive
User Controller
Inside of Drive
PNP Type
Type
To Next Page
Loading...
