Nidec NE200 - Page 71

NE200/300 Series Drive User Manual
62 Chapter 5 List of Parameters
Code Description Setting range Default Modify
Modbus
Address
dead-zone time
F2.14
Freq. lower-limit
treatment
0: Run with frequency
lower limit
0 × 030EH
1: Zero frequency
operation
F2.15 Reserved Reserved 0 ×
F2.16
③
Energy-saving
control select
0: Disable
1: Enable
1 ○ 0310H
F2.17
AVR Function
0: Disabled 1: Enabled
2 × 0311H
2: Disabled only at
speed-down
F2.18 Over modulation 0: Enabled 1: Disabled 1 × 0312H
F2.19
③
Droop control 0.00~10.00Hz 0.00Hz ○ 0313H
F2.20 Fan control mode
0: Auto mode
1: Always Running
0 × 0314H
F2.21
Instant-power-fail
ure treatment
0: Disabled
② 1: Drop frequency
(Reserved)
0 ○ 0315H
③
1: Drop frequency
2: Stop directly
F2.22
Instant-power-fail
ure freq. drop
point
210 ～ 600V
380V:420V
○ 0316H
220V:230V
F2.23
Instant-power
failure freq. drop
rate
1-800 400 ○ 0317H
F2.24
Motor speed
display ratio
0.00 ～ 500.0% 100.00% ○ 0318H
F2.25
UP/DOWN drop
to minus
frequency
0: Enabled
1 ○ 0319H
1: Disable
F2.26
ENTER key
function
0: No special action
0 ○ 031AH 1: FWD/REV switching
2: RUN for forward;