E29
Reference Section
1
Quick adjust is not available in Neutral, Monochrome, Custom 1 and Custom 2.
The values set manually are disabled if quick adjust is used after manual setting.
2
Not displayed for Monochrome.
3
Only displayed for Monochrome.
B Notes About Image Sharpening
The effects of Image sharpening cannot be previewed in the monitor during
shooting. Check the results in playback mode.
B Contrast, Saturation and A (Auto)
• Results for contrast and saturation vary with the exposure, and the position and
size of the subject in the frame.
• The setting for a COOLPIX Picture Control which has A (auto) selected for either
Contrast or Saturation is displayed in green in the COOLPIX Picture Control grid.
Toning
3
Controls the tint used in monochrome photographs from
B&W (black-and-white), Sepia, and Cyanotype (blue-tinted
monochrome).
Pressing the multi selector I when Sepia or Cyanotype is
selected enables you to select a saturation level. Press JK to
adjust the saturation.
• Default setting: B&W (black-and-white)
Option Description
To Next Page
