20
First Steps
Inserting Memory Cards
Pictures are stored in the camera’s internal memory (14 MB) or on removable
Secure Digital (SD) memory cards (available separately) (c 128).
If a memory card is inserted in the camera, pictures are automatically
stored on the memory card and only pictures recorded to the memory
card can be played back, deleted, or transferred. Remove the memory
card to store pictures in the internal memory, or play back or delete
pictures from the internal memory.
1 Turn the camera off and open the bat-
tery-chamber/memory card slot cover.
If the power-on lamp is lit, press the power switch to
turn off the camera.
Make sure that the camera is off (power-on lamp is
off) before inserting or removing the memory card.
2 Insert the memory card.
Slide the memory card in until it clicks into place.
Close the battery-chamber/memory card slot cover.
j Inserting Memory Cards
Inserting the memory card upside down or backwards could damage the
camera or the memory card. Make sure that the memory card is correctly
oriented when inserting.
To Next Page
Loading...
