82
Connecting to a Computer
Connecting to Televisions, Computers, and Printers
Setting the USB Option
Set the USB option in the setup menu (c 112) on the camera before con-
necting the camera to a computer or printer.
1 Display the setup menu by
pressing D, selecting Z (use
the rotary multi selector), and
then pressing d.
2 Choose [Interface] and press d.
3 Choose [USB] and press d.
4 Choose [PTP] or [Mass storage] and press
d (c 81).
The setting is enabled.
Press m to exit setup menu.
Set up
Exit
Set up
Format memory
Language
Interface
Reset all
Firmware version
Interface
Exit
USB
Video mode
Auto transfer
USB
Exit
PTP
Mass storage
To Next Page
Loading...
