112 Menu Guide
Change
main/sub
• Exposure setting: If Off is selected,
the main command dial
controls shutter speed and the
sub-command dial controls
aperture.
If On is selected, the
main command dial will control
aperture and the sub-
command dial shutter speed.
If On (Mode A) is selected,
the main command dial will be used to set aperture in
exposure mode A only.
• Autofocus setting: If On is selected, autofocus mode can be
selected by keeping the AF-mode button pressed and
rotating the sub-command dial, AF-area mode by
keeping the AF-mode button pressed and rotating the
main command dial.
These settings also apply to the command dials for the
MB-D17.
Aperture
setting
If Sub-command dial is selected, aperture can only be
adjusted with the sub-command dial (or with the main
command dial if On is selected for Change main/sub >
Exposure setting).
If Aperture ring is selected, aperture
can only be adjusted with the lens aperture ring and the
camera aperture display will show aperture in increments
of 1 EV (aperture for type G and E lenses is still set using the
sub-command dial).
Note that regardless of the setting
chosen, the aperture ring must be used to adjust aperture
when a non-CPU lens is attached.
Option Description
To Next Page
Loading...
