76 Menu Guide
Choose whether the camera detects and focuses on faces when
3D-tracking is selected for AF-area mode.
In 3D-tracking, the camera tracks subjects that leave the
selected focus point and selects new focus points as required
while the shutter-release button is pressed halfway.
Choose
whether 3D-tracking uses data from the surrounding focus
points to track subjects that move even slightly from the
selected focus point (Wide) or tracks the subject based solely on
data from the vicinity of the selected point (Normal).
Wide is
recommended for fast-moving subjects.
Choose the number of focus points available for manual focus-
point selection.
a4: 3D-Tracking Face-Detection
G button ➜ A Custom Settings menu
a5: 3D-Tracking Watch Area
G button ➜ A Custom Settings menu
a6: Number of Focus Points
G button ➜ A Custom Settings menu
Option Description
1
55 points
Choose from the 55 focus points
shown at right.
2
15 points
Choose from the 15 focus points
shown at right.
Use for quick focus-
point selection.
To Next Page
Loading...
