Nikon D500 - Conformity Marking

150 Menu Guide
When an Eye-Fi card is inserted, its status
is indicated by an icon in the information
display:
• j: Eye-Fi upload disabled.
• k: Eye-Fi upload enabled but no
pictures available for upload.
• l (static): Eye-Fi upload enabled;
waiting to begin upload.
• l (animated): Eye-Fi upload enabled; uploading data.
• m: Error — camera can not control Eye-Fi card.
If a flashing
W appears in the control panel or viewfinder, check that
the Eye-Fi card firmware is up-to-date; if the error persists after
the card firmware has been updated, insert a different card or
format the card in the camera after copying any pictures it
contains to a computer or other storage device. If the W
indicator is not flashing, pictures can be taken normally but
you may be unable to change Eye-Fi settings.
View a selection of the standards with which the camera
complies.
A Supported Eye-Fi Cards
Some cards may not be available in some countries or regions; consult
the manufacturer for more information.
Eye-Fi cards are for use only in
the country of purchase.
Be sure the Eye-Fi card firmware has been
updated to the latest version.
Conformity Marking
G button ➜ B setup menu