139Menu Guide
❚❚ Embedding Presets
To embed a preset in all new
photographs, highlight Auto embed
during shooting and press 2.
A list of
preset will be displayed; highlight a
preset and press J (to disable
embedding, select Off).
❚❚ Copying Presets to the Camera
To copy IPTC presets from a memory card to a selected
destination on the camera, select Load/save, then highlight
Copy to camera and press 2 to display a list of the presets on
the memory card (if two memory cards are inserted, the camera
will list the presets on the card in the primary slot).
Highlight a
preset and press J (to preview the highlighted preset press
W (M), then press J after viewing the preset to proceed to the
destination list).
Highlight a destination and press J.
The on-
screen keyboard will be displayed; name the destination as
desired and press J to complete the operation.
The camera can
store up to 10 presets.
❚❚ Copying Preset to a Memory Card
To copy IPTC presets from the camera to a memory card, select
Load/save, then highlight Copy to card and press 2.
Select an
IPTC preset, then highlight the desired destination (1–99) and
press J to copy the preset to the card.
If two memory cards are
inserted, the preset will be copied to the card in the primary slot.
To Next Page
Loading...
