104
A AF-S/AF-I Teleconverters
If 3D-tracking or auto-area AF is selected for AF-area mode when an
AF-S/AF-I teleconverter is used, single-point AF will automatically be
selected at combined apertures slower than f/5.6.
A See Also
For information on:
• How autofocus adjusts to changes in the distance to the subject, see
A > Custom Setting a3 (Focus tracking with lock-on, 0 260).
• Choosing whether the camera detects and focuses on faces when
3D-tracking is selected for AF-area mode, see A > Custom Settings
a4 (3D-tracking face-detection, 0 260).
• Choosing the area monitored by pressing the shutter-release button
halfway when 3D-tracking is selected for AF-area mode, see A >
Custom Settings a5 (3D-tracking watch area, 0 261).
• Choosing different focus points and/or AF-area modes for portrait-
and landscape-orientation photographs, see A > Custom Settings a7
(Store by orientation, 0 261).
• Limiting AF-area mode selection, see A > Custom Settings a9 (Limit
AF-area mode selection, 0 261).
• Choosing how the focus point is displayed, see A > Custom Settings
a12 (Focus point options, 0 262).
• Using the main command dial to choose the AF-area mode, see A >
Custom Settings f4 (Customize command dials) > Change main/
sub (0 269).
• The autofocus options available in live view or during movie
recording, see “Choosing an AF-Area Mode” (0 42).
To Next Page
Loading...
