139
Exposure compensation is used to alter exposure from the value
suggested by the camera, making pictures brighter or darker. It
is most effective when used with center-weighted or spot
metering (0 124). Choose from values between ā5 EV
(underexposure) and +5 EV (overexposure) in increments of
1
/
3 EV. In general, positive values make the subject brighter while
negative values make it darker.
To choose a value for exposure compensation, press the
E button and rotate the main command dial until the desired
value is displayed in the viewfinder or control panel.
Exposure Compensation
ā1 EV No exposure
compensation
+1 EV
E button
Main command dial
To Next Page
Loading...
