117
3 Start the timer.
Press the shutter-release
button all the way down to
start the timer. The self-
timer lamp will start to
flash. Two seconds before the photograph is taken, the self-
timer lamp will stop flashing. The shutter will be released
about ten seconds after the timer starts.
To turn the self-timer off before a photograph is taken, turn the
release mode dial to another setting.
A See Also
For information on:
• Choosing the duration of the self-timer, the number of shots taken,
and the interval between shots, see A > Custom Setting c3 (Self-
timer; 0 264).
• The beeps that sound when the self-timer is used, see B > Beep
options (0 274).
To Next Page
Loading...
