125
To choose a metering option, press the Y button and rotate the
main command dial until the desired setting is displayed in the
viewfinder and control panel.
A Non-CPU Lens Data
Specifying the focal length and maximum aperture of non-CPU lenses
using the Non-CPU lens data option in the setup menu (0 218)
allows the camera to use color matrix metering when matrix is selected
and improves the accuracy of center-weighted and spot metering.
Center-weighted metering will be used if highlight-weighted metering
is selected with non-CPU lenses or if matrix metering is selected with
non-CPU lenses for which lens data have not been supplied. Note that
center-weighted metering may also be used if highlight-weighted
metering is selected with certain CPU lenses (AI-P NIKKOR lenses and
AF lenses that are not of type G, E, or D; 0 284).
A See Also
For information on:
• Choosing whether matrix metering uses face detection, see A >
Custom Setting b5 (Matrix metering, 0 263).
• Making separate adjustments to optimal exposure for each metering
method, see A > Custom Setting b7 (Fine-tune optimal exposure,
0 263).
Y button Main command
dial
Control panel
Viewfinder
To Next Page
Loading...
