355
❚❚ Vibration Reduction (VR)
Using the Vibration Reduction ON/OFF Switch
• Select ON to enable vibration reduction. Vibration reduction is
activated when the shutter-release button is pressed halfway,
reducing the effects of camera shake for improved framing and
focus.
• Select OFF to turn vibration reduction off.
Using the Vibration Reduction Mode Switch
• Select NORMAL for enhanced vibration reduction when
photographing stationary subjects.
• Select ACTIVE to reduce the effects of vibration when shooting
from a moving vehicle, and in other situations with active
camera motion.
D5000/D3100/D3000/D60/
D40 series
24 mm 2.5 m/8 ft 3 in.
35–120 mm No vignetting
D3400
24 mm 1.5 m/5 ft
28 mm 1.0 m/3 ft 4 in.
35–120 mm No vignetting
Camera Zoom position
Minimum distance
without vignetting
To Next Page
