50
A Silent Live View Photography
Multiple exposure photography (0 254) and long-exposure noise
reduction are disabled (0 253). In continuous release modes, focus
and exposure are fixed at the values for the first shot in each series.
Flicker or banding may be visible in the monitor and in photographs
under fluorescent, mercury vapor, or sodium lamps (for information on
reducing flicker and banding, see the section on the movie shooting
menu Flicker reduction option, 0 254), while subjects in motion may
appear distorted, particularly if the camera is panned horizontally or
an object moves horizontally at high speed through the frame. Jagged
edges, color fringing, moiré, and bright spots may also appear. Bright
regions or bands may appear in scenes lit by flashing signs and other
intermittent light sources or if the subject is briefly illuminated by a
strobe or other bright, momentary light source.
The amount of time you can continue shooting is shown in place of the
number of exposures remaining.
Silent live view photography can also be enabled or disabled using the
Silent live view photography option in the photo shooting menu
(0 255).
To Next Page
Loading...
