Chapter 4 Assembly
69
4
(6) Attach a light shield to the front bottom of the
fluorescent attachment with the tool stored in
the back of the microscope.
12
Installing a Camera (when using a camera)
12-1 When attaching to the ergonomic binocular tube:
(1) To attach a camera head, screw it into the C
mount on the DSC port.
(2) Remove the rear cover of the ergonomic
binocular tube and insert the DSC port.
(3) Secure the DSC port into place with the tool
stored in the back of the microscope.
(4) Attach the camera cable to the camera head.
(Adjust the fitted position before using the
camera. Refer to 2.4 Photomicroscopy.)
12-2 When attaching to the trinocular eyepiece tube
(1) Attach the camera head to the trinocular eyepiece tube using the DSC adapter.
(2) Attach the camera cable to the camera head.
(Adjust the fitted position before using the camera.)
Li
To Next Page
Loading...
