Nikon Labophot Repair Manual

DISASSEMBLY PROCEDURE
/~
204)
Lubricant (G6053)
Fig. 27
2 38
A
,203
~/~
·~
R-4104 A
2. Substage Unit
5) Since of the two dovetail grooves ( @ and @ ), @ is to be used as fiducial
in reassembly, remove only @ in disassembly. (Fig. 28).
6) If stopper pin @ has once been separated, because the top end is liable to be damaged,
use the new one, whlch will facilitate reassembling with high accuracy. (Fig. 27).
7) The other parts can be dismounted in any sequence.
- 24 -

Nikon Labophot Specifications

General

Illumination	Built-in transmitted light, halogen lamp
Stage	Mechanical stage with coaxial controls
Focus	Coarse and fine focus knobs
Observation Methods	Brightfield, Phase Contrast
Condenser	Abbe condenser
Power Supply	AC 100-240V, 50/60Hz