Nikon Labophot Repair Manual

R-4108.A
DISASSEMBLING PROCEDURE
DISASSEMBLING PAOCEOURE
1) Detach the slide holder assembly from the stage releasing the flxmg screws 39 x 2.
2) Releasing the screws @x 2 remove the holder metal @ from the holder (E).
3) Removing the screws @separate the slide glass retainer @ together with the washer @ and
the spiral spring @ from the holder metal @. (Fig. 2)
Fig. 2
4) Releasing the screws @ .. 2. remove the rack@ (Fig. 4).
5) Removing the screws@><2 of the pinion cover(V separate the handle assembly from the stage.
6) Remove the nut @ of the X (right and left) knob @.
7) Remove the X knob @.
8) Remove the wave washer @. the Delrin washer@ and the tlat washer @.
9) Remove the round nuts @@ of the Y (to and fro) knob @.
10) Remove the wave washer@ and the Delrin washer @.
11) Remove the Y pinion @ and Y knob @ assembly.
-4-

Nikon Labophot Specifications

General

Illumination	Built-in transmitted light, halogen lamp
Stage	Mechanical stage with coaxial controls
Focus	Coarse and fine focus knobs
Observation Methods	Brightfield, Phase Contrast
Condenser	Abbe condenser
Power Supply	AC 100-240V, 50/60Hz