Nikon Labophot Repair Manual

R-4104 A
REASSEMBLY PROCEDURE 4. Base Unit
4. Base Unit
For reassembly, reverse the disassembly procedure, remembering that the parts to be oiled or
cemented (Fig. 32 - 35) are to be cleaned and dried, beforehand, and the specified lubricant
or adhesive should
be applied.
- 37 -

Nikon Labophot Specifications

General

Illumination	Built-in transmitted light, halogen lamp
Stage	Mechanical stage with coaxial controls
Focus	Coarse and fine focus knobs
Observation Methods	Brightfield, Phase Contrast
Condenser	Abbe condenser
Power Supply	AC 100-240V, 50/60Hz