15
●
●
●
Characteristics of the LCD panel
• Due to the directional characteristics of LCDs, the display is difficult to read when viewed
from above. However, the display can be seen clearly from a slightly lower angle.
• The LCD display becomes darker at high temperatures (approx. 60°C/140°F), but
returns to normal at normal temperatures (20°C/68°F).
• The LCD’s response time decreases at low temperatures (approx. 5°C/41°F and below),
but returns to normal at normal temperatures (20°C/68°F).
u
Using the SB-600 in dim light
Press any button on the SB-600 to turn the illuminator on (when the SB-600
power is on), and it will remain lit for 16 seconds.
•To cancel the LCD panel illumination, go to the Custom Settings mode (p. 52) and set it
to OFF.
• Even if the LCD panel illuminator is set to OFF, the SB-600’s LCD panel illuminator turns
on when the camera’s LCD panel illuminator is turned on. The LCD panel illuminator also
lights up when the Custom Settings mode is displayed.
* CLS: Creative Lighting System (p. 5)
Preparation
To Next Page
Loading...
