45
Checking the illumination before actually taking the picture
(Modeling illuminator)
When using the Modeling illuminator function, the flash fires repeatedly at a
reduced flash output level. This is useful for checking the illumination and the
shadows cast on the subject before actually taking the picture.
• The Modeling illuminator function operates for 1 second.
• This function operates only after the ready-light comes on.
●
●
●
Modeling illuminator with cameras compatible with
CLS attached
The Modeling illuminator fires when the Modeling illuminator button on a
compatible camera is pressed.
• For details, see your camera instruction manual.
Other functions
To Next Page
Loading...
