Nikon SB-600 - Test firing (Confirming the exposure)

20
2 Test firing (Confirming the exposure)
1
Press the
b
button for approx. 0.3
second to turn on the SB-600. Make sure
the ready-light comes on.
2
Press the
h
button to test fire the flash.
● ● ● Test firing
CAUTION!
Do not test fire the Speedlight near your eyes.
• The SB-600 fires at specified output in the Manual flash mode or at approx. 1/16 output
in the TTL auto flash mode.
● ● ●
b
button
Pressing the
b
button for approx. 0.3 second turns on the SB-600 and the
indications appear on the LCD panel. Pressing the button again turns off the
SB-600 and the indications disappear.