Nikon SB-600 - Page 59

59
● ● ● Using the Speedlight Stand
Use the provided Speedlight Stand AS-19 for stable placement of the remote
flash units.
•You can also use the stand for setting up your Nikon Speedlight when using it as a
remote flash unit in multiple flash shooting using cords (p. 66).
Attachment to the Speedlight Stand
1
Attach the SB-600 to the Speedlight Stand in the
same way that you attach it to the camera’s
accessory shoe. The same is true when
detaching it from the Stand.
t
To prevent the remote flash units from firing accidentally
• Do not leave the power of the remote flash units on. Otherwise, ambient electric noise
due to a discharge of static electricity, etc. may trigger them accidentally.
Advanced operations
Speedlight mounting shoes
for the SB-15 and SB-27
Speedlight mounting shoe
(for all Speedlights except
the SB-15 and SB-27)
Tripod socket
Setup examples
using the SB-27