Nilfisk-Advance SC450 Service Manual

General Information
17
Service Manual – SC450
Service and Diagnostic Equipment
Besides a complete set of standard meters, the following instruments are necessary to perform fast checks,
maintenance and repairs on Nilsk-Advance machines:
Besides a complete set of standard meters, the following instruments are necessary to perform fast checks and
repairs on Nilsk-Advance machines:
• Laptop computer charged with the current version of EzParts, Adobe Reader and (if possible) Internet
connection
• Digital Volt Meter (DVM)
• Amperometric pliers with possibility of making DC measurements
• Hydrometer
• Battery charge tester to check 12V batteries
• Static control wrist strap
• Dynamometric wrench set
• A copy of the Instruction for use and Spare Parts List of the machine to be serviced (provided with the
machine or available at www.advance-us.com or other Nilsk-Advance websites).
The following equipment is also available at Nilsk-Advance Centers:
• Vacuum water lift gauge, P/N 56205281

Nilfisk-Advance SC450 Specifications

General

Model	SC450
Type	Walk-behind scrubber
Power Source	Battery
Voltage	24 V
Cleaning Width	450 mm
Squeegee Width	450 mm
Brush Motor Power	550 W
Machine Width	450 mm
Machine Length	850 mm
Machine Height	850 mm