Squeegee System 90Service Manual – SC450
Squeegee System
Functional Description
The squeegee system cleans the liquid off the oor,
which is then collected by the recovery system.
The squeegee is mounted on castors, the pressure of
the tires on the oor is caused by the spring load on
the system.
The squeegee is fastened to the machine by two wing
nuts in the squeegee support slots. In case of xed
obstacles, the quick-t system allows for squeegee im-
mediate removal.
The squeegee support is hinged to the machine by
means of a bracket which allows the squeegee to turn
sideways.
The angle of the squeegee and the correct adherence
of the blades on the oor can be adjusted with a knob.
The front blade has openings on the edges to convey
and collect the water towards the centre of the squee-
gee. The design and the central duct make it easy for
the squeegee to clear the water. The rear blade edge is
smooth, to collect the water and dry the oor.
All 4 functional edges of each blade can be used before
it needs replacing.
The squeegee is lifted and lowered by a cable which is
manually controlled by the operator with a knob.
To Next Page
Loading...
Need help?
General
