Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 5
Other Reference Manuals
Nilsk Models
• Instrucons for Use – Form Number 56091000
• Parts List – Form Number 56042542
Advance Models
• Instrucons for Use – Form Number 56041820
• Parts List – Form Number 56042535
Conventions
Forward, backward, front, rear, le or right are intended with reference to the operator’s posion, that is to say in driving
posion with the hands on the handlebar.
Transporting the Machine
CAUTION!
Before transporng the machine on an open truck or trailer, make sure that . . .
• The machine is ed down securely.
• All access doors and covers are secured (tape and strap as needed).
Towing
CAUTION!
If the machine must be towed or pushed, make sure the Key Switch is in the OFF posion. Do not move the machine
faster than a normal walking pace (2-3 mph, 3-5kph) and for short distances only. Note: Disconnecng the wheel drive
motor wiring connector will make a disabled machine easier to push.
Cautions and Warnings
Symbols
Nilsk-Advance uses the symbols below to signal potenally dangerous condions. Read this informaon carefully and
take the necessary steps to protect personnel and property.
DANGER!
Is used to warn of immediate hazards that will cause severe personal injury or death.
To Next Page
Loading...
Need help?
General
