Nilfisk-Advance SC800 Service Manual

Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 110
Removal and Installation
Solution Valve
1. Work near a oor drain for convenient clean up if possible.
2. Turn the key switch on and lower the brush head by pushing the Scrub On/O switch.
3. Unplug the deck actuator to prevent deck from rising.
4. Turn the key switch o.
5. Close soluon shut o valve.
6. Remove soluon mounng plate screws.
7. Remove hose clamps and hoses.
8. Disconnect electrical connector.
9. Reassemble in reverse order.
Solution Tank
1. Empty recovery and soluon tanks.
2. Remove brush head.
3. Remove brush head actuator.
4. Remove recovery tank.
5. Remove baeries.
6. Remove brush head actuator support
a. Remove two top bolts.
b. Remove lower through bolt and nut.
7. Remove handle assembly.

Nilfisk-Advance SC800 Specifications

General

Brand	Nilfisk-Advance
Model	SC800
Category	Scrubber
Language	English