Nokia 252 252 - Last Number Redial; Speed Dialing; 1-Touch Dialing

16
Last Number Redial
• Clear the display, then press   .
Last 10 Dialed Calls
• Clear the display, press  , then ▼. Press ▼ repeatedly
until you see the number you want. Then press  to
dial it.
See “Dialed Calls (Menu 2 1)” on page 32 for more information.
Speed Dialing
• Dial the number of the memory location (1-99) where the
phone number is stored, then press  .
You can also enter a stored name then press  . The phone
dials the number stored with that name.
If the memory location is empty, the message
LOCATION
EMPTY
appears.
1-Touch Dialing
If 1-Touch Dialing is set to On, you can dial the phone number
stored in any of the memory locations 1-8 by pressing a single
key:
• Hold the required number key (1-8) for 2 seconds.
Note: Location 1 is recommended to be used as the Voice Mailbox Num-
ber. Location 9 cannot be used for 1-Touch Dialing to any number other
than the preprogrammed emergency number.
See “1-Touch Dialing (Menu 3 6)” on page 36.