23
Saving Numbers and Names
Quick Save
1)
Enter the area code and phone number.
2)
(Optional) Press
, then enter the name.
3)
Press
. When
SAVE IN LOCATION?
is displayed,
press
.
The phone stores the number in the first empty memory
location. The memory location is shown in the display’s upper
right corner.
Identical names cannot be stored in memory. If you try to store
a name that is already stored, the phone displays
SAVE IN
LOCATION n?
(with n being the location currently containing
the matching name). To confirm, press
. Then, the phone
asks if you want to replace the entry. To do this, at
REPLACE?
(followed by the name), press
.
If you don’t want to replace the contents, re-enter the informa-
tion using a slightly different name, then save again.
Note: You can also use Menu 1 to find, save, edit, and erase
stored entries. See “Phone Book (Menu 1)” on page 30.
Memory Location 125
This is a special memory location. If you store a number in loca-
tion 125, you can make calls to that number even if the phone
is locked. See “Lock Phone (Menu 6)” on page 47.
Special Characters in Stored Numbers
In stored numbers, you can include a 2.5 second pause (‘p’
character), a wait (‘w’ character), or a link to another location (‘+’
character). This allows the automatic sending of Touch Tones.
For more information on using these special characters see
“Automatically Sending Touch Tones” on page 51.
To Next Page
Loading...
