• Start-up tone
— The device plays a tone when it is
switched on.
Enhancements
This menu or the following options are shown only if
the device is or has been connected to a compatible
mobile enhancement.
Select
Menu >
Settings >
Enhancements
. Select an
enhancement, and depend
ing on the enhancement,
from the following options:
• Default profile
— to select the profile that you want
to be automatically activated when you connect to
the selected enhancement
• Automatic answer
— to set the device to answer
an incoming call automatically after 5 seconds. If
Incom. call alert:
is set to
Beep once
or Off,
automatic answer is off.
• Lights — to set the lights permanently
On. Select
Automatic to set the lights on for 15 seconds after
a keypress.
• Text phone
— Select
Use text phone
> Yes to use
this setting instead of headset or loopset settings.
Configuration
You can configure your device with settings that are
required for certain services. Your service provider may
also send you these settings
. See "Configuration setting
service," p. 9.
Select
Menu >
Settings > Configuration and from the
• Default configu- ration settings
— to view the
service providers saved in the device. To set the
configuration settings of the service provider as
default settings, select
Options
> Set as default.
•
Activate default in all applications — to activate
the default configuration settings for supported
applications
•
Preferred access point
— to view the saved access
points. Scroll to an access point, and select
Options
>
Details
to view the name of the service provider,
data bearer, and packet data access point or GSM
dial-up number.
• Connect to service provider support
— to
download the configuration settings from your
Security
When security features that restrict calls are in use (such
as call barring, closed user group, and fixed dialing),
44
Settings
Cyan
file:/D:/temp/overmode/GUID-1AFD4F23-530A-4
232-B1A2-AD8C3D7641D3.en.2007032610120756111748
93494768/en/1/GUID-E9B10502-9BEE-452E
-A2EB-4A477D49C6EB.xml Page
44 Mar 26, 2007 10:19:10 AM
Cyan
file:/D:/temp/overmode/GUID-1AFD4F23-530A-4
232-B1A2-AD8C3D7641D3.en.2007032610120756111748
93494768/en/1/GUID-E9B10502-9BEE-452E
-A2EB-4A477D49C6EB.xml Page
44 Mar 26, 2007 10:19:10 AM
Device manager settings
— to allow or prevent
the device from receiving software updates. This
option may not be availa
ble, depending on your
device. See "Software updates over the air," p. 45.
Personal configu- ration settings
— to manually
add new personal accounts for various services and
to activate or delete them. To add a new personal
account if you have not added any, select
Add
new
; otherwise, select
Options
> Add new
. Select
the service type, and select and enter each of the
required parameters. The parameters differ
according to the selected service type. To delete or
activate a personal account, scroll to it, and select
Options
> Delete or
Activate.
•
•
f
o
ll
owin
g optio
n
s:
service provider (Availability depends on service
provider)
To Next Page
Loading...
Need help?
General
