Nokia 7210 SAS-M Series User Manual

7210 SAS-M CHASSIS INSTALLATION GUIDE Preface
Issue: 07 3HE 10089 AAAA TQZZA Edition 01 11
1 Preface
1.1 About This Manual
This guide provides site preparation recommendations, step-by-step procedures to
rack mount the Nokia 7210 Service Access Switch MPLS (SAS-M), and instructions
to install and configure the system software.
This guide hereafter refers to all the variants (7210 SAS-M 24F, 7210 SAS-M 24F
2XFP, and 7210 SAS-M 24F 2XFP ETR) as 7210 SAS-M. Any differences amongst
the variants are called out separately, as applicable.
Each 7210 SAS-M switch is shipped with rack-mounting brackets, power cord (AC
only), and rubber feet.
1.1.1 Warnings and Notes
Observe the warnings and notes provided in each chapter to avoid injury or
equipment damage during installation and maintenance. Follow the safety
procedures and guidelines when working with and near electrical equipment.
1.1.2 Audience
This guide is intended for network installers and system administrators who are
responsible for installing, configuring, or maintaining networks. This guide assumes
that you are familiar with electronic and networking technologies.

Nokia 7210 SAS-M Series Specifications

General

Brand	Nokia
Model	7210 SAS-M Series
Category	Switch
Language	English