Specifications
76
7210 SAS-M CHASSIS INSTALLATION GUIDE
3HE 10089 AAAA TQZZA Edition 01 Issue: 07
Canadian Requirements Only
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Réglement
sur le matériel brouilleur du Canada.
[a] The following markings (or the equivalent) appear on the product or a tag attached
to the product:
"PRODUCT COMPLIES WITH FDA RULE 21 CFR SUBCHAPTER J IN EFFECT AT
DATE OF MANUFACTURE"
"PRODUIT CONFORME SELON LE SOUS CHAPITRE J DU DOCUMENT DHHS
RÈGLE 21 CFR EN VIGUEUR LORS DE LA DATE DE FABRICATION"
or
"PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11"
"PRODUIT CONFORME SELON 21CFR 1040.10 ET 1040.11".
Class 1: (Cl. 5.2 of IEC 60825-1)
Each Class 1 laser product shall have affixed an explanatory label (Figure 15 of IEC
60825-1, see Appendix C of this Design Manual) bearing the words:
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
or instead, at the discretion of the manufacturer, the same statement may be
included in the information for the user.
Nokia[b] Equipment where the dc supply circuit is connected to the earthing
conductor
Equipment that has the earthed conductor of a dc supply circuit connected to the
earthing conductor at the equipment shall be provided with a permanent marking
located near and in plain view of the field wiring terminals and worded as indicated.
Alternatively, the wording can be replaced by the symbol on the product if the
specified wording appears in the installation instructions.
“CAUTION: This equipment has provision for a connection between the earthed
conductor of the dc supply circuit and the earthing conductor. See installation
instructions.”
“Cet appareil est conçu pour permettre le raccordement du conducteur relié à la terre
du circuit d’alimentation c.c. au conducteur de terre de l’appareil.”
To Next Page
Loading...
Need help?
General