Nokia Beacon 6 - Page 106

Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
106 3FE-47429-AAAA-TCZZA Issue: 01

Triggering Port Enter the triggering port range
(1 of 2)
Field Description
Expire Time Enter the expiration time in seconds
Open Protocol Choose the open port protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Trigger Protocol Choose the triggering port protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Enable Triggering Select this checkbox to enable port triggering
WAN Connection List Choose a WAN connection from the drop-down menu
Note—only active devices are shown on this menu
(2 of 2)

2 Configure port triggering.

3 Click Add.

4 STOP. This procedure is complete.

Procedure 34 DDNS configuration

1 Select Application > DDNS from the top-level menu in the Ethernet Gateway window, as
shown in Figure 46.
