Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B)
1
Issue: 01 3FE-47429-AAAA-TCZZA 95
Field Description
MAC Filter Mode Choose the MAC filter mode from this drop-down menu: Blocked or Allowed
LAN Port Select the checkboxes for the LAN ports
MAC Address Choose a MAC address from the drop-down menu or enter the address in the text field
WiFi SSID
MAC Filter Mode Choose the MAC filter mode from this drop-down menu: Blocked or Allowed
SSID Select Choose an SSID option from the drop-down menu
Enable Select this checkbox to enable MAC filtering for WiFi SSID
MAC Address Choose a MAC address from the drop-down menu or enter the address in the text field
(2 of 2)
2 Configure a MAC filter for the Ethernet interface.
3 Click Save.
6 Configure a MAC filter for WiFi SSID (WLAN MAC filter).
7 Click Save.
8 STOP. This procedure is complete.
Procedure 27 IP filter configuration
Select Security > IP filter from the top-level menu in the Ethernet Gateway window, as
shown in Figure 39.
4
If desired, select a MAC address and click the Delete column to delete a MAC address.
5
Click Refresh to update the information.
To Next Page
Loading...
