Nordmann DC4 - Performing Remote Relay Tests; Performing Module Tests

35
4.7.3 Performing remote relay tests
Select the remote test:
Path: Main menu > Diagnostic > Remote Test
The list with the remote relay tests appears, the rst relay test (steam) is shown.
Press the < > and < > keys in order to select the further relay tests available and press the <Set>
key to activate/deactivate the corresponding relay for testing.
4.7.4 Performing Module tests
Select the Module tests:
Path: Main menu > Diagnostic > Module Test
The list with the module tests appears, the rst test (Inlet Valve) is shown.
Press the < > and < > keys in order to select the further tests of the selected module and press the
<Set> key to activate/deactivate the corresponding component for testing.
Main Menu
Engineering :Set
Diagnostic :Set
User :Set
Esc Set
Main Menu
Engineering :Set
Diagnostic :Set
User :Set
Esc Set
Diagnostic
Unit Status :Set
Remote Test :Set
Module Test :Set
ErrorHistory:Set
Esc Set
Diagnostic
Unit Status :Set
Remote Test :Set
Module Test :Set
ErrorHistory:Set
Esc Set
Menu
RC4 230V2
Standby
2011-10-31 12.00.00
Menu
RC4 230V2
Standby
2011-10-31 12.00.00
Esc Set
Remote Test
Remote Dampf:
O
Remote Service:
O
Remote Error:
O
Remote Unit On:
O
Esc Set
Module Test
Inlet Valve:
O
Outlet Pump:
O
Main Contactor:
O
O
Fan: