Customizing your IP Phone 1230—basic features
54
Use the following procedure to configure Preferred Name Match.
Configuring the area codes
Use the Area Code Setup menu to save up to three area codes. When a
call arrives with an area code that matches one of the saved area codes,
the calling number is reordered to display the telephone number followed
by the area code (as opposed to the area code followed by the telephone
number).
This reordering applies when you scroll through your Callers List.
1. Press the Services key, select
Telephone Options, and select Call
Log Options.
2. Press the Up or Down keys to scroll up
or down, and then select Preferred
Name Match.
3. Press the Enter key.
4. Press the Up or Down keys to scroll up
or down, and then select one of the
following:
— Preferred name match: On
— Preferred name match: Off
5. Press the Select soft key to save the
configuration.
or
Press the Cancel soft key to keep
existing configurations.
(Services)
or
CancelSelect
To Next Page