Nortel 1230 - Page 55

Customizing your IP Phone 1230—basic features
55
Use the following procedure to configure default area codes (maximum of
three).
1. Press the Services key, select
Telephone Options, and select Call
Log Options.
2. Press the Up or Down keys to scroll up
or down, and then select Area Code
Setup.
3. Press the Enter key.
4. Press the Up or Down keys to scroll up
or down, and then select one of the
following:
— 1st Code
— 2nd Code
—3rd Code
5. Press the Enter key.
6. Use the dialpad to enter the number at
the prompt.
(Services)