Nortel 1230 - Page 56

Customizing your IP Phone 1230—basic features
56
Use the following procedure to edit area code display.
7. Press the Select soft key to save the
configuration.
or
Press the Cancel soft key to keep
existing configurations.
1. Press the Services key, select
Telephone Options, and select Call
Log Options.
2. Press the Up or Down keys to scroll up
or down, and then select Area Code
Setup.
3. Press the Enter key.
4. Press the Up or Down keys to scroll up
or down, and then select one of the
following:
— 1st Code
— 2nd Code
—3rd Code
5. Press the Enter key.
or
CancelSelect
(Services)